Users Guide ValueJet 1614
20 AP-75790 Rev 1.4 -22/02/2011,
2.1 FEATURES
(1) High-speed output
The new type print head achieves high-speed output.
It is compatible with media up to 1615 mm in width.
(2) Wide variety of compatible media
The head is adjustable to two levels of height and compatible with media between 0.01 mm and 0.3 mm in
thickness.
(3) Vibrant colour reproduction
Four colours of ink are used for printing in order to reproduce sharp and vivid colours. This printer uses 220
ml of large capacity solvent ink cassette with a dedicated IC chip. This cassette can control the ink quantity
for printing improving productivity.
Use of variable dot can also improve colour reproduction.
(4) Multi-heater
Heaters are installed at three locations (pre-heater, fixer (platen), dryer) allowing the solvent ink to fix better
on the media and dry more quickly.
(5) Effective use of media
A JOG feature is provided to allow setting of the print starting position as required. Printing can be performed
on media that has already been printed on. This allows effective use of left margins.
To Next Page
Loading...
Need help?
General