MUTOH valuejet 1614 User Manual

Users Guide ValueJet 1614
100 AP-75790  Rev 1.4 -22/02/2011,
5.1.4 Replacing the spitting box sponges
Be sure to read and understand the safety warnings before handling the printer.
(1) Pre- transport procedure
Replace the spitting-box sponges in the following situations.
When the spitting-box sponge becomes deformed.
When smears of ink appear on the media
Two months after replacement.
(2) Type
Notes
For types and details of the spitting-box sponge, contact your local Mutoh dealer.
(3) Replacing steps
Step 1 : If the printer is switched ON, make sure that:
Printing or other operations are not in progress.
The operation panel display is Normal.
Step 2 : Open the front cover.
Step 3 : Remove the spitting-box sponges from each spitting box by using forceps.
(2 at the left spitting box  1 at the right spitting box)
ï
ï
ï
î
N° Name
1 spitting boxes
2 spitting-box sponge
Step 4 : Install the new spitting-box sponge to each spitting box.
Step 5 : Close the front cover.
Spitting-box sponge replacement is complete.

MUTOH valuejet 1614 Specifications

General

Brand	MUTOH
Model	valuejet 1614
Category	Printer
Language	English