Users Guide ValueJet 1614
83 AP-75790 Rev 1.4 -22/02/2011,
4.7.10 Head fan menu
Activate the head fan if blurring or dot losses occur during printing.
Setup item Setting Description
Headfan <OFF> The fan is not activated
ON Activates the fan
----- [CANCEL] key: saves the setting and shifts to the previous menu
4.7.11 CR Movement menu
Set up the range to move the print head while printing.
Setup Item Setting Value Description
CR Movement
<Data>
The print head movement equals the print data width.
Improve the print speed since decreasing the transferring range of
the print head.
Machine The print head moves from origin to the maximum media width.
[Enter] key: Save the setting value and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting value and shift to the previous
hierarchy.
Refer to: Setup menu
4.7.12 Overwrite Cnt menu
Setup Item Setting Value Description
Overwrite Cnt
<once> to 9 times Set the overwrite count.
[Enter] key: Save the setting and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
4.7.13 Overwrite Wait menu
Notes
By increasing the overwrite wait time, you allow more time for the ink to settle and fix.
Setup Item Setting Value Description
Overwrite Wait
<0s> to 0.1s to 5.0s Set the Overwrite Wait time.
[Enter] key: Save the setting and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
Refer to: Setup menu
To Next Page
Loading...
Need help?
General