Users Guide ValueJet 1614
86 AP-75790 Rev 1.4 -22/02/2011,
4.7.19 CR Maintenance menu
Setup Item Setting Value Description
CR Maintenance
Start
Clean the wiper.
[Enter] key:
The print head moves to the centre.
The wiper moves forward.
End
Cleaning the wiper is complete.
[Enter] key:
Print head returns to the original position.
The wiper returns to the original position.
[Cancel] key: Shift to the previous hierarchy without the wiper
cleaning operation.
Refer to: Setup menu
4.7.20 Initialization menu
The setting value of the printer is returned to default.
Setup Item Setting Value Description
Initialization
ALL All settings return to factory default.
MediaType The settings of the MediaType menu are returned to factory default.
Except MediaType
The settings other than the MediaType menu are returned to factory
default.
[Enter] key:
Display "Initialling" on the operation panel, and initialize the setting.
[Cancel] key: Shift to the previous hierarchy without initialization.
Refer to: Setup menu
4.7.21 Life Times menu
Setup Item Setting Value Description
Life Times
Head Display the operational life of each part.
The operational life of a part is indicated by five asterisks (100 %).
As the part deteriorates, the number of asterisks decreases one by
one (20 %).
The part should be changed when all of the asterisks have
disappeared, and "Change" is displayed.
Pump
CR Motor
PF Motor
[Cancel] key: Shift to the previous hierarchy.
Refer to: Setup menu
Notes
Do not keep using a part which has reached its life span. Problems caused by doing so will not be
covered by the warranty.
To Next Page
Loading...
Need help?
General