MUTOH valuejet 1614 User Manual

Users Guide ValueJet 1614
80 AP-75790  Rev 1.4 -22/02/2011,
4.7.3.1 Flushing return count menu
Set the frequency (flushing return count) that the print head returns to the original spitting box when setting
"On Media" in the Flushing menu.
Notes
When increasing the flushing return count, clogging may occur while printing continuously.
Setup Item Setting Value Description
Return count
Once to < 5 times > to
999 times
Set the flushing return count.
Example
± Once: return to the original spitting box every time the print
head goes and returns once.
± 5 times: return to the original spitting box every time the
print head goes and returns five times.

[Enter] key: Save the setting and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.7.4 Side Margin menu
Setup Item Setting Value Description
Count
<5 mm> to 25 mm Set the side margin.

[Enter] key: Save the setting value and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting value and shift to the
previous hierarchy.
Refer to: Setup menu
Notes
When selecting "On Media" in the Flushing menu, the value of the Side Margin is set automatically.
4.7.5 Media Initial menu
Set up whether the media width and edge will be detected when initializing the media.
Setup Item Setting Value Description
Init.
OFF
The media is not detected.
Notes
When media initial menu is set to OFF, you can manually set the
media width in the media width menu.
Refer to: Media Width / Media Width menu
Top&Width Detect the media width and edge while initializing the media.
<Width> Detect the media width while initializing the media.

[Enter] key: Save the setting value and shift to the previous hierarchy.
[Cancel] key: Cancel the setting value and shift to the previous
hierarchy.
Refer to: Setup menu

MUTOH valuejet 1614 Specifications

General

Brand	MUTOH
Model	valuejet 1614
Category	Printer
Language	English