Users Guide ValueJet 1614
117 AP-75790 Rev 1.4 -22/02/2011,
Does not work after loading the media.
N° Possible cause remedy Reference
1
Is the front cover open or media loading lever
raised?
Close the front cover.
Lower the media loading
lever.
setting media
2 Is the maintenance cover open?
Close the maintenance
cover?
cleaning the wiper
3 Is the media loaded at an angel? Load the media straight Setting media
4 Is the ink cassette inserted? Insert the ink cassette install ink cassettes
5 Are you using he recommended media?
Use the recommended
media
6
Is the printer being used in an environment
other than the one specified?
Only use the printer in an
environment that is
specified for use.
installation manual
When data is sent from the computer, an error occurs at the printer and nothing is printed
N° Possible cause remedy Reference
1
Is the type of printer selected correctly at the
computer
Check that the printer
type settings on the
computer side and on
the printer side are the
same.
connecting the printer to
a PC
2
Are the interface requirements and command
mode the same on the computer side as on
the printer side?
Cannot use the computer online using LAN
N° Possible cause remedy Reference
1
Is the network interface cable connected
correctly?
Confirm the types of the
cross and straight
cables, and connect the
network interface cable
correctly
connecting a network
interface
2 Are the network settings configured correctly?
Configure the network
settings correctly
panel setup menu
3
Match the printers network settings with the
computer side environment.
Match this products
network settings with the
computer side
environment
system requirements
4
Does the data lamp on the operation panel
switch ON after sending printing data from the
computer?
If the data lamp does not
switch ON, contact the
computer manufacturer
Be sure to read and understand the safety warnings before handling the printer.
To Next Page
Loading...
Need help?
General