Users Guide ValueJet 1614
62 AP-75790 Rev 1.4 -22/02/2011,
Step 5 : Press the [>] key on the operation panel
Result:
The operation panel displays Test1: Nozzle Check.
The display enters the Test Print menu
Step 6 : Press the [+] key or [-] key on the operation panel to select the item you want to print and press
the [Enter] key.
Submenus: ·Nozzle Check ·Mode print ·Setup print ·All Set List ·Palette print
Result: Printing starts for the selected submenu.
Notes
Please refer to the following topics for details on each item of the test print list:
Nozzle Check to Palette print
When "Banner 1" or "Banner 2" is set in the Print Mode menu, "PalettePrint" is not displayed on the
Test Print menu.