VJ-1624/1624W OPERATION MANUAL 3 Before using
3-85
2. Press the [+] key or [-] key on Operation panel to select "Adj.2: Rough Pattern".
3. Press the [Enter] key on Operation panel.
• For VJ-1624, "Warming Up Skip ->E" is displayed on Operation panel.
(This is not displayed for VJ-1624W since it does not perform warming up.)
CAUTION
• While "Warming Up" is displayed, do not touch Platen and Media guide. They
become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.7 Starting printing during warming up (VJ-1624 only)
• Starts a rough adjustment pattern printing.
(VJ-1624 starts printing after warming up is complete.)
• For the rough adjustment pattern, the same patterns will be printed on both sides and center of
the media.
To Next Page
Loading...
Need help?
General