7 Troubleshooting VJ-1624/1624W OPERATION MANUAL
7-8
(4) White or black lines appear on printed media
(5) Printing lines are not straight
(6) Printing lines are duplicated or patchy
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the roll media loaded correctly? Load the roll media correctly.
3.4.1 Loading
roll media
3 Are Nozzles in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
4 Did you perform Micro adjust print? Perform Adjust print.
3.6 Print quality
adjustment
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
6 Is the temperature setting of each heater
appropriate?
(VJ-1624 only)
Set the temperature appropriately.
5.1.1.1.4 Pre-
heater menu (VJ-
1624 only) to
5.1.1.1.6 Dryer menu
(VJ-1624 only)
7 Is the head height set to "High" or "Mid"? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
1 Is Ink cartridge within the validity period? Use a new Ink cartridge.
6.1.1 Replacing
Ink cartridges
2 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
3 Did you perform Micro adjust print? Perform Adjust print.
3.6 Print quality
adjustment
4 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
No. Possible cause Remedy Reference
1 Are Nozzles in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
2 Is the head height set to "High" or "Mid"? Return the head height to "Low".
4.2.5 Head
height adjustment
To Next Page
Loading...
Need help?
General