VJ-1624/1624W OPERATION MANUAL 3 Before using
3-17
• When head cleaning is complete, "Wash retry? No" is displayed on Operation panel.
3. Select whether to perform cleaning of the ink path before the initial ink charge.
NOTE
• Cleaning may be required depending on the ink type to be set.
• To perform head cleaning, make sure to use the cleaning liquid that matches the ink.
a. When cleaning is required, press the [+] key or [-] key to select "Yes".
b. When cleaning is not required, proceed to the step 8.
4. Press the [Enter] key on Operation panel.
• "Insert CleaningCart." is displayed on Operation panel.
5. Take out Cleaning cartridges (4 pieces) from the bags.
To Next Page
Loading...
Need help?
General