Safety MY500 JetPrinter MYDATA
1 - 4 Rev. 0003 2008-06 P-030-0014-EN – Service Manual
Warning Signs
The warning signs on the machine must be observed as this machine contains
fast moving parts, magnetic fields, and high voltage. The machine has warning
signs placed as shown on the following pages.
At least one manual that describes the warning signs of the particular machine
type must always be kept, for instance if the machine is upgraded with a later
TPSys version.
Optional devices have the warning signs shown in their documents.
Number and position of each sign type is described in the following text. If a
sign is missing, it must be replaced immediately. Part numbers are printed on
the signs, and can also be read from this description.
All signs must be kept clean and readable.
Fast Moving Machinery
Sign 1 warns of the fast machine movement. No hands, fingers, or other
objects are allowed beyond the shield. Ensure that all covers and shields are
intact, mounted and closed while the machine is in operation. Do not disable
or disengage any safety switch or sensor.
These signs are applied as follows:
– One sign on the left side protective shield, see Figure 1-4.
– One sign on the right side protective shield, see Figure 1-5.
1
European and
Canadian
standards
US standards
To Next Page
Loading...