Need help?Do you have a question about the MYDATA MY500 JetPrinter and is the answer not in the manual?
Details on the machine's red emergency stop buttons and their function when pressed.
Identifies the safety hoods and their corresponding switches on the MY500 machine.
Explains the machine's warning signs related to hazards like fast moving parts and high voltage.
Information on signs warning of electric shock and safe handling of high voltage units.
Details on warning signs for strong magnetic fields and precautions for personnel.
Safety guidelines for compressed air, solder paste, glue, and waste disposal procedures.
Guidance on preventing Electrostatic Discharge (ESD) and procedures for fire safety.
Prerequisites for site preparation, including environmental and electrical requirements.
Details on machine dimensions, shipping weight, and required clearance space.
Specifications for electrical voltage, power, and compressed air supply.
Instructions for safely transporting the machine via truck, air, or sea.
Overview of installation tasks including unpacking, lifting, powering, and software setup.
Guidance on establishing network (LAN) and SMEMA connections for external equipment.
Instructions for removing transport locks on the Y beam and X wagon before operation.
Brief description of the MY500 JetPrinter and its jet printing technique.
Explanation of the jet printing system's components and piezo technology.
Identification of main machine parts located both inside and outside the unit.
Description of touchscreen, keyboard, trackball, and barcode scanner inputs.
Details on the machine's framework and the three-dimensional movement systems.
Explanation of the Y beam and X wagon, including their linear motor drives.
Description of cassette interface, holder, ejector, and solder paste cartridge.
Information on the internal conveyor and the optional manual load table.
Overview of machine electronics, units, and various system block diagrams.
Introduction to the service system for calibration and adjustments.
Details on the system overview screen showing machine and software information.
Examples of screens used for testing and calibrating the movement system.
Guidelines on maintenance intervals, cleaning optics, lubricants, and spare parts.
Procedures for daily maintenance of equipment, cassette, machine, and calibration units.
Tasks for weekly maintenance, including cleaning scales and checking hoods.
Procedures for monthly maintenance of machine and optional air dryer.
Details on yearly maintenance tasks requiring authorized service engineers.
Step-by-step instructions for replacing the calibration paper roll.
Procedure for changing the waste container for solder paste.
Instructions for replacing the solder paste ejector unit.
Guidance on lubricating the X wagon rail and bearings every 720 operating hours.
Procedures for testing the machine's safety system and its circuits.
Tables summarizing daily, weekly, monthly, and 720-hour maintenance actions.
Information about the MY500 JetPrinter operator's manual.
Details on the MY500 machine programming manual.
Information about the MY500 JetPrinter service manual content.
Information on the available MY500 JetPrinter spare parts catalog.
To Next Page
General