MYDATA MY500 JetPrinter Routine Maintenance
P-030-0014-EN – Service Manual Rev. 0003 2008-06 5 - 1
5. Routine Maintenance
This chapter informs about preventive maintenance for the MY500 JetPrinter.
The described maintenance should be performed at stated intervals. The
warranty on the machine and parts applies only if these instructions are
followed.
WARNING! Before commencing any maintenance, press an emergency stop
button down or turn the power off.
The following maintenance work is described:
• Daily Maintenance.
• Weekly Maintenance.
• Monthly Maintenance.
• Yearly Maintenance.
• Changing Calibration Paper.
• Changing Waste Container.
• Changing Cassette Ejector.
• Lubricating X wagon Rail – 720 Operating Hours.
• Testing the Safety System.
To Next Page
Loading...