MYDATA MY500 JetPrinter - Italic Font; Bold Font; Menu Selections; Lists

MYDATA MY500 JetPrinter Preface
P-030-0014-EN – Service Manual Rev. 0003 2008-06 vii
Italic Font
Italic font is used for software screen text (for example Parameter 1), names
(for example Spare Parts Catalog), and for warning text (described in the
previous section).
Bold Font
Bold font is used for particular important words (for example This must not
be done in reverse order).
Menu Selections
When describing software handling, menu selections are described in the
following format:
File > Page Setup > Paper Size > Portrait > OK
This example describes to open the File menu and select the Page Setup,
Paper Size, and Portrait options, and finally click the OK button.
Lists
Lists of items, points to consider, or procedures that have no relative order
appear in bulleted or hyphenated format like this:
• Item 1.
• Item 2.
or
–Item1.
–Item2.
Procedures that must be performed in a specific order appear in numbered lists
like this:
1. Perform this step first.
2. Perform this step second.