MYDATA MY500 JetPrinter - Others

Routine Maintenance MY500 JetPrinter MYDATA
5 - 8 Rev. 0003 2008-06 P-030-0014-EN – Service Manual
– Wipe off the X linear scale using a dry lint-free cloth. Be careful not
to scratch or damage the surface.
Others
– Wipe off the screen if needed. Use a soft cloth and dampen the cloth
slightly with clean water. Do not use abrasives or cleaning solutions.

Do not use abrasives or cleaning solutions!
– Warning signs on the machine must be clean and readable. If needed,
clean or replace the signs (refer to the MY500 JetPrinter, Operator’s
Manual).
Figure 5-9. X linear scale.
X linear scale