MYDATA MY500 JetPrinter Routine Maintenance
P-030-0014-EN – Service Manual Rev. 0003 2008-06 5 - 9
Monthly Maintenance
This preventive maintenance shall only be carried out by authorized service
engineers.
Equipment
– Lint-free cloths.
– Vacuum cleaner or blow nozzle.
Machine
– Remove dust from the ventilation areas on the top back hood.
Use a vacuum cleaner or an air blow nozzle.
Optional Refrigerated Air Dryer
– Remove dust from the ventilation area on the optional Refrigerated
Air dryer. Use a vacuum cleaner or an air blow nozzle.
– Check valves for scratches, gouges, abrasion, and corrosion.
– Check tubes and valves for air leakage.
– Check tubes for twisting, flattening, or distortion.
– Check tubes for hardening, deterioration, or softness.
Replace components as necessary. Refer to the Refrigerated Air Dryer
manual.
To Next Page
Loading...