MYDATA MY500 JetPrinter Adjustments
P-030-0014-EN – Service Manual Rev. 0003 2008-06 4 - 1
4. Adjustments
The JPSys system includes a service system. This is a tool used to calibrate and
adjust the machine systems. In this manual we will not describe the service
system. This chapter is only a brief orientation.
WARNING! The service system is intended as a tool for authorized service
engineers only. Adjustments may only be performed by authorized personnel!
The service system is started from the Exit window.
The machine must always be re-calibrated after it has been moved.
Figure 4-1. Exit window.
To Next Page
Loading...