MYDATA MY500 JetPrinter Safety
P-030-0014-EN – Service Manual Rev. 0003 2008-06 1 - 11
Compressed Air
This machine uses compressed air for its operation.
WARNING! Compressed air can be dangerous if handled incorrectly.
Assembly, handling, or repair of pneumatic systems must be performed by
trained and experienced personnel.
Solder Paste, Glue and Conditioner
Cassettes for the machine contain solder paste, which is a mixture of powder
and flux. They can also contain glue. Ejectors are filled with conditioner at
delivery.
WARNING! During handling and use, solder paste, glue and conditioner may
be hazardous to health and to the environment. Read the Material Safety Data
Sheet and warning label before usage.
Always remember that care should be taken to avoid the ingestion of
chemicals. They may contain lead and other toxic materials, so gloves, safety
goggles and gowns should be worn during handling, and hands should be
washed afterwards.
– Observe normal standards for handling chemicals.Avoid breathing
vapour. Avoid contact with skin and eyes. Wash hands before breaks
and after work. Wear personal protective equipment appropriate to the
task.
– Avoid breathing vapour. Avoid contact with skin and eyes. Wash
hands before breaks and after work. Wear personal protective
equipment appropriate to the task
Waste Disposal
Solder paste and any material with remnants of solder paste must be treated as
hazardous waste. This also applies to glue.
Do not allow to get into waste water or waterways. If this occurs, inform the
relevant water authority at once.
Empty containers may contain product residue.
Observe all label precautions.
To Next Page
Loading...