MYDATA MY500 JetPrinter Routine Maintenance
P-030-0014-EN – Service Manual Rev. 0003 2008-06 5 - 3
Daily Maintenance
Equipment
– Lint-free cotton wool buds.
– Lint-free cloths.
Cassette
– Check the guide pins on the holder for wear or damage. If the guide
pins are damaged, replace the holder.
– Wipe off any solder paste or dirt from the holder´s backside with a
lint-free cloth.
– Wipe off solder paste from the nozzle uing a lint-free cloth and attach
protective tape before placing it in a cold storage, see Figure 5-2.
Figure 5-1. Guide pins and backside of Cassette holder.
Figure 5-2. Solder paste nozzle.
Guide pin
Holder backside
Guide pin