117
Cirrus LT Plus User Manual v1.2 - Chapter 6
Important Teradici host software settings
To ensure a proper connection between your notebook and the remote machine,
make sure the following settings are set:
• Ensure the Cirrus LT Plus and remote machine have the most current Teradici
Firmware versions.
• The PCoIP software is installed on your remote host.
• The Host Driver Function is enabled on the host card.
• Your network resources meet bandwidth, QoS, latency, jitter, and packet loss re-
quirements.
*NCS provides a copy of this manual on our website, www.ncst.com, but for the latest revision
of this manual, you should always check www.teradici.com.
To Next Page
Loading...