28 Cirrus LT Plus User Manual v1.2 - Chapter 2
Touchpad
The touchpad is a cursor-pointing device. You can point, select, or drag items or ob-
jects on the screen. For more details on configuring the touchpad, see Device Man-
ager Section in Chapter 4.
Point
Slide your finger on the touchpad to point the cursor to an item or object on the
screen.
Click
To left-click, move the cursor to the item or object on the screen, then lightly tap
the touchpad or press the left button (by default this tapping feature is disabled
in NCS Firmware to prevent unwanted cursor movements while typing. Refer
to Chapter 4’s Device Manager section to enable this feature.).
To right-click, move the cursor to the item or object on the screen, then press
the right button.
Double-click
To double-click, move the cursor to the item or object on the screen, then tap
the touchpad twice or press the left button twice (by default this tapping feature
is disabled in NCS Firmware to prevent unwanted cursor movements while typ-
ing. Refer to Chapter 4’s Device Manager section to enable this feature.).
Drag
To drag an item or object, press and hold the left button then slide your finger on
the touchpad to move the item or object.
The Cirrus LT Plus does not support advanced touchpad features such as
scrolling, pinching, and multi-touch.
To Next Page
Loading...