115
Cirrus LT Plus User Manual v1.2 - Chapter 5
You can also Press the Power button to Connect and Disconnect from a
remote session. Pressing the button between 1ms to 1 second will disconnect.
Pressing and holding the Power button (for more than 1 second) will power
down the unit.
Assigning a Static IP Address
You can only assign a static IP address using the Teradici Firmware. To assign a static IP
address for your notebook:
1. Select the Options menu in the upper left hand corner.
2. Click Configuration then Network.
3. Uncheck the Enable DHCP box.
4. Type in the desired IP address.
To Next Page
Loading...