NCS Cirrus LT Plus - Installing and Removing SIM Card

To Next Page

To Previous Page

Cirrus LT Plus User Manual v1.2 - Chapter 2

Installing/Removing the SIM card

For instructions on how to configure 4G functionality via the OnScreen

Menu, refer to Chapter 4.

Installing the SIM card

To install the SIM card into your Cirrus LT Plus, follow the steps below:

1. Make sure you have your SIM card and the insertion tool included with your

Cirrus LT Plus on hand.

2. Remove the Cirrus LT Plus’ external battery from the notebook bottom by

sliding the tabs to the unlocked position.

3. Remove the battery.