NEC DS1000 Correspondence Course Workbook

DS1000/2000 Correspondence Course
Using Your Telephone
14 ◆ DS1000/2000 Workbook NEC America
How each phone operates depends on how you program it. The line and function
keys simplify placing calls, answering calls, and using certain features. You can
customize the function of any keyset’s Programmable Function keys from the
system program (Program 1701). Depending on the type of phone at each exten-
sion, you may need to set the extension’s circuit type in Program 1801 in order
for all the Programmable Function keys to work.
The following features can be programed as a function key.
● Call Coverage ● Loop Key, Fixed ● Reverse Voice Over
● Call Timer ● Loop Key, Switched ● Speed Dial, Personal
● Group Pickup ● Message Center ● Speed Dial, System
● Hotline ● Night Key ● Split Key
● Intercom Directory ● Page Zones ● Voice Mail Record Key
Dialing
● Line Key ● Park Orbit
If you unplug a 34-button telephone and replace it with a 22-button telephone,
Programmable Function Keys 13-24 are inaccessible. However, the system still
retains the programming for those keys. So you should make sure to remove any
Programmable Function Key programming for keys 13-24.
When you initially start the system, the keysets are defined as follows:
● DS1000 - Keys 1-6 are line keys for trunks 1-6
DS2000 - Keys 1-12 are line keys for trunks 1-12
● DS1000 - Keys 7-24 are undefined
DS2000 - Keys 13-24 are undefined
● Key 11 is a Night Key (for attendants only - extension 300 by default)
● Key 12 (on 22-button) or Key 24 (on 34-button) is an Operator Key
(for attendants only - extension 300 by default)

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English