DS1000/2000 Correspondence Course
DS1000 System Installation
NEC America DS1000/2000 Workbook ◆ 55
❏
Power-up the system.
1. Make sure the system is properly grounded.
2. Install a surge protector in the AC outlet.
3. Plug the main cabinet’s AC power cord into its surge protector.
4. Turn on the cabinet’s power switch.
After a brief interval, the system will start and the power LED will
flash slowly (green).
Power Switch
80200 -28
8
0
2
0
0
- 1
4
Power LED