System Configuration 4-11
Processor Settings
When you select “Processor Settings” in the Main menu, the following screen appears.
ᴾ
Refer to the table below for information on options.
Option Parameter Description
Processor Speed Setting ʊ Displays the speed of the processor.
Processor 1 CPUID CPUID When the processor 1 in installed, its
CPU ID is displayed. If the system
supports "Hyper-Threading
Technology,” the ID of a physical
processor but not logical processor
appears here.
Processor 1 L2 Cache ʊ Displays the cache size of the L2 of
the processor 1.
Processor 2 CPUID CPUID
[Not Installed]
When the processor 2 is installed, its
CPU ID is displayed. If it the
processor is not installed, "Not
Installed" appears.
Processor 2 L2 Cache ʊ Displays the caches size of the L2 of
the processor 2.
Hyper-Threading Technology Disabled
[Enabled]
Specify whether or not to enable
Hyper-Threading Technology.
Execute Disable Bit [Disabled]
Enabled
Specify whether or not to enable the
Execute Disable Bit feature.
Cache Setting [Continuous]
Discrete
Change the MTRR setting of the
processor. If it takes time to display
screen, set “Discrete.”
[ ]: Factory-set
To Next Page
Loading...
