4-72 System Configuration
- Message
c
d
e
f
g
(1) Specify mail address of receivers to whom alert mail is sent. You can specify up to four
addresses.
(2) Specify the sender’s address used in alert mail.
(3) Enter the subject to be given to alert mail.
(4) Select whether or not to enable the body messages for all alert mail, which is configured in
the next step.
(5) Enter the body message to be used in all alert mail. If you do not need such a body message,
clear the check box of (4). If you click [Get Default Message], the recommended message
appears.
TIPS:
The subject and message you configure here will be used in all alert mails.
To Next Page
Loading...
