CHAPTER 2 INSTALLATION
– 86 – NWA-008853-001 Rev.3.0
97ch2001.fm
• When providing the Common Signaling Data Link via LDT/ODT:
(1) Connect the RS NORM-4 CA-A/RS NORM-4S CA-A to the CCH card and the MODEM (PBX side)
as shown below.
Cable Connection for Common Signaling Data Link via LDT/ODT
(2) Connect the LINE cable to the MODEM and the MDF as shown below.
• Location of AP Slots and LTC Connectors for CCH Page 87
• Example of LINE Cable and MDF Cross Connection for CCH Page 88
MDF
MODEM
LINE
LINE CABLE
MODULAR
TERMINAL
DTE
RS NORM-4 CA-A/RS NORM-4S CA-A
(4 m/13.1 ft.)
PBX
INSTALLATION
CABLE
LTC0/LTC1/LTC2/LTC3
RS
BWB
CCH
CONECTOR
INSTALLATION PROCEDURE FOR ANALOG CCIS
To Next Page
Loading...
