NEC NEAX 2000 IPS - Brokerage-Hot Line-Ccis

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 140 – NWA-008853-001 Rev.3.0
97ch3002.fm
BROKERAGE-HOT LINE-CCIS
General Description
This feature provides a ringdown connection between two stations, each using a D
term
, in different offices
in the CCIS network.
Programming
DESCRIPTION DATA
Assign the Virtual Line station number to the
required Virtual LEN.
(1)
(2)
000-255: Virtual LEN
X-XXXXXXXX: Virtual Line station No.
Assign the Hot Line to the Virtual Line stations
assigned by CM11.
•
(1)
(2)
Y=03
X-XXXXXXXX: Virtual Line station No.
04: Hot Line
Allocate the memory area for the Hot Line-
Outside call.
For example, to assign the 10 Hot Line-Out-
side calls into No. 100 through No. 109 Mem-
ory Slots, 2nd data is “100010”. Abbreviated
Codes are automatically assigned as shown be-
low:
(1)
(2)
65: For Hot Line-Outside
XXX YYY
XXX: 000-299 (Starting Memory Slot No.
in blocks)
YYY: 001-300 (No. of Memory Slots to be
assigned in blocks)
Assign the destination party’s number and
name to each Memory Slot number.
•
(1)
(2)
Y=0
000-299: Memory Slot No.
XXXX YY...Y
XXXX: Access Code (Maximum 4 digits)
: Separator Mark
YY...Y : Calling Party’s No.
(Maximum 26 digits)
•
(1)
(2)
Y=1
000-299: Memory Slot No.
XXX...X: Station Name Character Code
(Maximum 32 digits: 16 charac-
ters)
See CM77 in the Command Manual.
START
CM11
CM12
CM71
Memory Slot 100
Memory Slot 109
~
Abbrev. Codes
00
09
~
CM72
,
,
A
BROKERAGE-HOT LINE-CCIS