NEC NEAX 2000 IPS - Route Advance Assignment

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 124 – NWA-008853-001 Rev.3.0
97ch3001.fm
Route Advance Assignment
To provide the Alternative Routing (another trunk route) for CCT when an outgoing call via No. 7 CCIS
is not available due to a fault occurrence, do the following programming.
DESCRIPTION DATA
Provide the voice channel route of CCT with
Alternative Routing for a fault occurrence.
•
(1)
(2)
Y=186
00-63: Trunk Route No.
0: To provide
1: Not provided
Provide the tandem calls with Alternative
Routing for a fault occurrence.
•
(1)
(2)
Y=192
00-63: Trunk Route No.
0: To provide
1: Not provided
Provide the system with Alternative Routing
of CCIS outgoing call when all outgoing
trunks of tandem office are busy.
(1)
(2)
372
0: To provide
1: Not provided
Set the ORT timer when established tandem
connection to CCIS.
•
(1)
(2)
Y=0
104
03-99: 03-99 seconds
(1 second increments)
If no data is set, the default setting is 7 seconds.
Assign a Numbering Plan Group to each ten-
ant.
(1)
(2)
00-63: Tenant No.
710-713: Numbering Plan Group 0-3
Assign the access code for LCR Group 0-3. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
START
CM35
CM08
CM41
CM29
CM20
A
JANUARY/31/2006
DIGITAL CCIS PROGRAMMING