CHAPTER 3 SYSTEM DATA PROGRAMMING
– 306 – NWA-008853-001 Rev.3.0
97ch3005.fm
NIGHT CONNECTION-FLEXIBLE-CCIS
General Description
This feature provides an inter-office night connection service, via the CCIS network, when the calling
station and the night station belong to different offices.
Programming
Refer to “DIRECT-IN TERMINATION-CCIS”. Page 264
Operating Procedure
To set the Night Connection-Flexible-CCIS:
1. The Attendant or fixed night station user in the destination office sets Call Forwarding-All Calls-
CCIS to a station in another office.
To answer Night Connection-Flexible-CCIS calls:
1. In the Night mode, incoming calls to the Attendant Console are automatically transferred to a pre-
selected Night Connection station belonging to a different office.
2. The calling party hears ring back tone.
3. Ring signal is sent to the Night Connection station.
4. The Night Connection station lift the handset to answer the incoming call.
JANUARY/31/2006
NIGHT CONNECTION-FLEXIBLE-CCIS
To Next Page
Loading...
