CHAPTER 3 SYSTEM DATA PROGRAMMING
– 176 – NWA-008853-001 Rev.3.0
97ch3002.fm
CALL TRANSFER-ALL CALLS-CCIS
General Description
This feature allows a station user to transfer incoming or outgoing Central Office, intra-office and inter-
office calls to another station in the CCIS network, without Attendant assistance.
Programming
DESCRIPTION DATA
Assign Service Restriction Class A to the re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction
Class A
Allow Trunk to Trunk Transfer in Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=22
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign Service Restriction Class C to the re-
quired stations.
•
(1)
(2)
Y=07
X-XXXXXXXX: Station No.
XX: 00-15 : Service Restriction
Class C
Allow switch hook flash capability during
C.O. line connection in Service Restriction
Class C assigned by CM12 Y=07.
•
(1)
(2)
Y=90, 91
00-15: Service Restriction Class C
assigned by CM12 Y=07
1 : Allow
Specify the combination of Trunk Routes al-
lowing a Trunk to Trunk (CCIS) Connection.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route)
0 : Allow
1 : Restricted
START
CM12
CM15
CM12
CM15
CM36
A
CALL TRANSFER-ALL CALLS-CCIS
To Next Page
Loading...
