CHAPTER 3 SYSTEM DATA PROGRAMMING
– 270 – NWA-008853-001 Rev.3.0
97ch3004.fm
DO NOT DISTURB-CCIS
General Description
This feature allows a station user to establish the Do Not Disturb (DND) status on a temporary basis, dur-
ing which time access to the station from incoming CCIS calls will be denied.
Station Application
Single Line Telephone, D
term
and Attendant Console
Programming
DESCRIPTION DATA
Assign Service Restriction Class A to the
required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction
Class A
Allow Do Not Disturb in Service Restriction
Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=19
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the Do Not Disturb group of stations.
Do Not Disturb is set simultaneously for the
stations assigned by this command, by opera-
tion from the Attendant Console.
•
(1)
(2)
Y=00
X-XXXXXXXX: Station No.
0: To provide
Assign the access code for Do Not Disturb Set/
Cancel.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A022: Do Not Disturb Set
A023: Do Not Disturb Cancel
Assign the destination of the call when the
called station is set to Do Not Disturb.
•
(1)
(2)
Y=10
00-63: Tenant No.
X-XXXXXXXX: Station No.
E000: Attendant Console
START
CM12
CM15
CM13
CM20
CM51
A
JANUARY/31/2006
DO NOT DISTURB-CCIS
To Next Page
Loading...
