NEC NEAX 2000 IPS - Page 285

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 271 – NWA-008853-001 Rev.3.0
97ch3004.fm
DESCRIPTION DATA
If the Attendant Console is assigned as the des-
tination by CM51, assign a Call Forwarding-
Intercept (ICPT) key to the console.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F6065: Call Forwarding-Intercept Key
Assign a Do Not Disturb function key to the
D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0022: Do Not Disturb set/reset
Assign Do Not Disturb and Do Not Disturb
Override function keys to the ATTCON/
DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6102: Do Not Disturb
F6104: Reset
Specify the Call Forwarding-Busy Line/Sta-
tion Hunting for a station with Do Not Disturb
set.
(1)
(2)
240
0 : Available
1 : Not available
For a system with multiple-tenant, specify the
destination of a call transferred in CM51
Y=10.
(1)
(2)
241
0 : Tenant of called station
1 : Tenant of calling station
Select the Dial Tone on setting Do Not Disturb. •
(1)
(2)
Y=2
14: Dial Tone on setting Do Not Disturb
0 : Special Dial Tone (Stutter Dial Tone)
1: Dial Tone
A
CM90
,
,
,
CM08
CM48
END
JANUARY/31/2006
DO NOT DISTURB-CCIS