CHAPTER 3 SYSTEM DATA PROGRAMMING
– 244 – NWA-008853-001 Rev.3.0
97ch3004.fm
CENTRALIZED DAY/NIGHT MODE CHANGE-CCIS
General Description
This feature switches the Day/Night Mode of a remote office, linked to the main office (2400 IPX) via
CCIS, in accordance with the Day/Night Mode switching on the Attendant Console at the main office.
• For Satellite Office
If the Attendant Console is required in the Satellite Office, the following programming is required.
DESCRIPTION DATA
Assign as ineffective Trunk Restriction Class
change by NT (Night) switch on ATTCON/
DESKCON.
•
(1)
(2)
Y=02
0-7: ATTCON No.
1 : Ineffective
Assign as ineffective outgoing call restriction
on Night Mode by NT switch on ATTCON/
DESKCON.
•
(1)
(2)
Y=04
0-7: ATTCON No.
1 : Ineffective
Assign as ineffective Day/Night Mode Change
by NT switch on ATTCON/DESKCON.
•
(1)
(2)
Y=06
0-7: ATTCON No.
1 : Ineffective
SATELLITE OFFICE MAIN OFFICE
ATT
CCIS
2400 IPX
2000 IPS
START
CM60
INITIAL
INITIAL
INITIAL
END
CENTRALIZED DAY/NIGHT MODE CHANGE-CCIS
To Next Page
Loading...
