CHAPTER 3 SYSTEM DATA PROGRAMMING
– 148 – NWA-008853-001 Rev.3.0
97ch3002.fm
CALL BACK-CCIS
General Description
This feature provides inter-office Call Back. A station that has dialed a busy station at another office can
set Call Back-CCIS by dialing a feature access code. When this feature has been set, the setting station will
ring as soon as the busy station becomes available.
Programming
DESCRIPTION DATA
Assign Service Restriction Class A to the re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction
Class A
Allow Call Back in Service Restriction Class
A assigned by CM12 Y=02.
•
(1)
(2)
Y=03
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Call Back. •
(1)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
For setting the different access code from OG
Trunk Queuing:
(2) A002: Call Back Set
A003: Call Back Cancel
For setting the same access code as OG Trunk
Queuing:
(2) A004: Set
A005: Cancel
Assign a Call Back key to the D
term
, if desired. •
(1)
(2)
Y=00
My Line No. + + Key No.
F0004: Trunk Queuing-Outgoing/Call
Back
START
CM12
CM15
CM20
CM90
,
END
JANUARY/31/2006
CALL BACK-CCIS
To Next Page
Loading...
Need help?
General