CHAPTER 3 SYSTEM DATA PROGRAMMING
ā 268 ā NWA-008853-001 Rev.3.0
97ch3004.fm
DISTINCTIVE RINGING-CCIS
General Description
This feature provides distinctive station ringing patterns for terminated calls, through the CCIS network,
so that a station user can distinguish between incoming internal and external calls.
Programming
DESCRIPTION DATA
Specify the interval of ringing for each type of
incoming calls through the CCIS.
(1)
(2)
138: For CCIS call
See the table below
[North America Only]
[Other than North America]
RINGING
The ringing pattern should be selected in PBX-B.
COT
ODT
STATION
PBX-A
PBX-B
CCIS
START
CM08
CM08>138 For calls from station/Tie Line
through CCIS
For calls from C.O. through
CCIS
0 2 seconds ON-4 seconds OFF 1 second ON-2 seconds OFF
1 1 second ON-2 seconds OFF 2 seconds ON-4 seconds OFF
CM08>138 For calls from station/Tie Line
through CCIS
For calls from C.O. through
CCIS
0 As per CM08>392 pattern 1 As per CM08>396
1 As per CM08>396 As per CM08>392 pattern 1
A
DISTINCTIVE RINGING-CCIS
To Next Page
Loading...
