CHAPTER 3 SYSTEM DATA PROGRAMMING
– 275 – NWA-008853-001 Rev.3.0
97ch3004.fm
DUAL HOLD-CCIS
General Description
This feature allows two connected D
term
s to be placed on hold simultaneously over the CCIS link. This
enables the held parties to answer or originate a call from a secondary extension or the idle prime exten-
sion.
Programming
Operating Procedure
To operate Dual Hold-CCIS from a D
term
:
1. The user at Station A presses the Hold key; the user at Station B is placed on hold.
2. The user at Station B presses the Hold key; the user at Station A is placed on hold.
3. Dual Hold-CCIS is now in progress.
DESCRIPTION DATA
Assign Service Restriction Class B to the re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction
Class B
Allow Dual Hold in Service Restriction Class
B assigned by CM12 Y=02.
•
(1)
(2)
Y=64
00-15: Service Restriction Class B as-
signed by CM12 Y=02.
1 : Allow
START
CM12
CM15
END
DUAL HOLD-CCIS
To Next Page
Loading...
