CHAPTER 3 SYSTEM DATA PROGRAMMING
– 178 – NWA-008853-001 Rev.3.0
97ch3002.fm
CALL TRANSFER-ATTENDANT-CCIS
General Description
This feature permits a station user, while connected to a CCIS network call, to transfer a call to an Atten-
dant Console via the CCIS network.
Programming
DESCRIPTION DATA
Assign Service Restriction Class A to the re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction
Class A
Allow Trunk to Trunk Transfer in Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=22
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign Service Restriction Class C to the re-
quired stations.
•
(1)
(2)
Y=07
X-XXXXXXXX: Station No.
XX: 00-15 : Service Restriction
Class C
Allow Switch hook flash capability during
C.O. line connection in Service Restriction
Class C assigned by CM12 Y=07.
•
(1)
(2)
Y=90, 91
00-15: Service Restriction Class C
assigned by CM12 Y=07
1 : Allow
Specify the combination of Trunk Routes al-
lowing a Trunk to Trunk (CCIS) Connection.
The incoming Trunk Route must provide a re-
lease signal for this feature.
(See CM35 Y=05 in the Command Manual)
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route)
0 : Allow
1 : Restricted
Specify Call Transfer from a station before the
called attendant answers.
(1)
(2)
063
0 : Available
1 : Not available
START
CM12
CM15
CM12
CM15
CM36
CM08
END
CALL TRANSFER-ATTENDANT-CCIS
To Next Page
Loading...
