CHAPTER 1 GENERAL INFORMATION
ā 17 ā NWA-008853-001 Rev.3.0
97ch1001.fm
CARD NAME AND FUNCTION
This table shows the circuit card name and function for No. 7 CCIS.
Card Name and Function
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PN-AP00-B AP00 Application Processor Card
Provides four RS-232C ports, and is used for SMDR, Hotel
Printer, CIS, PMS, MCI functions.
(For PMS function, PN-AP00-B with MRCA program is not
available.)
One card per system.
PN-AP00-D AP00 Application Processor Card
Provides four RS-232C ports, and is used for SMDR, Hotel
Printer, CIS, MCI functions.
One card per system.
PN-24CCTA CCT CCIS (1.5 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
PN-30CCTA CCT CCIS (2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
PN-DTA CCT CCIS (1.5 Mbps/2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
PN-24DTA-C DTI T1 Digital Trunk Interface (1.5 Mbps) Card
Accommodates 24-channel PCM digital lines.
PN-30DTC-C DTI E1 Digital Trunk Interface (2 Mbps) Card
Accommodates 30-channel PCM digital lines.
Continued on next page
JULY/01/2006
CARD NAME AND FUNCTION
To Next Page
Loading...
