CHAPTER 3 SYSTEM DATA PROGRAMMING
– 137 – NWA-008853-001 Rev.3.0
97ch3002.fm
ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS
General Description
This feature permits the Attendant, when the desired station at another switching office is busy, to hold an
incoming call in a special waiting mode. A distinctive Camp-On tone is sent to the busy station when the
Attendant sets Camp-On. When that station becomes idle, it is automatically rung and connected to the
waiting trunk party.
Station Application
Attendant Console
Programming
DESCRIPTION DATA
Specify the Camp-On Tone sent to busy sta-
tion.
(1)
(2)
068
0 : Camp on Tone is sent out only once.
1 : Camp on Tone is repeated at an
interval of 4 seconds
Specify the recall timing of Camp-On. •
(1)
(2)
Y=0
00
01-14: 2.4-33.6 seconds
(2.4 second increments)
15-24: 38.4-124.8 seconds
(9.6 second increments)
If no data is set, the default setting is 31.2-33.6
seconds.
START
CM08
CM41
END
ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS
To Next Page
Loading...
