CHAPTER 3 SYSTEM DATA PROGRAMMING
– 315 – NWA-008853-001 Rev.3.0
97ch3005.fm
STATION-TO-STATION CALLING-CCIS
General Description
This feature permits any station user to dial another station directly, through CCIS, without Attendant
assistance.
Programming
In addition to the programming of flexible station numbering, perform the following programming:
DESCRIPTION DATA
Assign a station number to each LEN.
NOTE 1: We recommend the setting of station
number by CM14, when using Series
3200 R6.2 software or later.
NOTE 2: To the following stations, 5 or more
digits station number must not be
assigned.
• Stations observed by SMDR/
PMS/OAI
• Front Desk Terminal/D
term
TIMS
(CIS)
(1)
(2)
000-763: LEN
X-XXXXXXXX: Station No.
Assign a station number to each LEN.
[Series 3200 R6.2 software required]
NOTE: To the following stations, 5 or more
digits station number must not be
assigned.
• Stations observed by SMDR/
PMS/OAI
• Front Desk Terminal/D
term
TIMS
(CIS)
(1)
(2)
XX ZZZ (LEN)
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
X-XXXXXXXX: Station No.
NONE : No data
START
CM10
CM14
A
STATION-TO-STATION CALLING-CCIS
To Next Page
Loading...
