NEC NEAX 2000 IPS - Page 330

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 316 – NWA-008853-001 Rev.3.0
97ch3005.fm
Operating Procedure
To place a Station-to-Station call:
1. Lift the handset and receive dial tone.
2. Dial the desired station number.
DESCRIPTION DATA
Assign the station type to each station.
NOTE: For providing the DTMF station,
DTMF Receivers (PN-8RST) are re-
quired.
•
(1)
(2)
Y=00 Telephone types
X-XXXXXXXX: Station No.
1 : DP-10PPS
2: DTMF
3: DTMF/DP
•
(1)
(2)
Y=03 Kind of Telephone
X-XXXXXXXX: Station No.
15 : Ordinary station
A
CM12
END
STATION-TO-STATION CALLING-CCIS