NEC NEAX 2000 IPS - Page 286

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 272 – NWA-008853-001 Rev.3.0
97ch3004.fm
To set an outside party through CCIS as a destination of transferred call
DESCRIPTION DATA
Assign the Virtual Line station number to the
required LEN.
(1)
(2)
000-255: Virtual LEN
X-XXXXXXXX: Virtual Line Station No.
Assign Service Restriction Class A to each sta-
tion.
•
(1)
(2)
Y=02
X-XXXXXXXX: Virtual Line Station No.
assigned by CM11
XX ZZ
XX: 00-15 : Service Restriction Class A
Assign Call Forwarding-All Calls-Outside to
Service Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=26
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allowed
Assign Call Forwarding-All Calls-Outside to
the Virtual Line station number assigned by
CM11.
•
(1)
(2)
Y=00 Call Forwarding-All Calls
X-XXXXXXXX: Virtual Line Station No.
assigned by CM11
Destination No.: X-XXXX + + YY···Y
X-XXXX: Outgoing Trunk (1-4 digits)
: Separate Mark
YY···Y : Called No. (Maximum 26 dig-
its)
NONE : No data
For system with multiple-tenant, specify the
tenant of calling station as the destination of a
call transferred in CM51 Y=10.
(1)
(2)
241
1 : Tenant of calling station
Assign the destination of the call when called
station is set to Do Not Disturb as Virtual Line
station assigned by CM11.
•
(1)
(2)
Y=10
00-63: Tenant No.
X-XXXXXXXX: Virtual Line Station No.
assigned by CM11
START
CM11
CM12
CM15
CME6
,
,
CM08
CM51
END
JANUARY/31/2006
DO NOT DISTURB-CCIS