CHAPTER 3 SYSTEM DATA PROGRAMMING
ā 123 ā NWA-008853-001 Rev.3.0
97ch3001.fm
(11) Assign the route access data.
NOTE: The example shows:
22 XX
Station numbers in office B
25 XX
Station numbers in office C
No second dial tone will be heard.
No digits will be added.
Command Code 1st Data 2nd Data
20 Y=0 22 A129 : Access Code=22
20 Y=0 25 A129 : Access Code=25
8A Y=A000 3 4007 : Area Code Development Pattern No. 5
8A Y=4007 22 0000 : Route Pattern 000 (22XX)
25 0001 : Route Pattern 001 (25XX)
8A Y=0000 1 00010 : Route 10 access by 22XX
8A Y=0001 1 00012 : Route 12 access by 25XX
20 Y=0 21 804 : 4 digits station (for originating station
No.)
85 Y=5 22 04
Maximum number of digits dialed is 4.
25 04
DIGITAL CCIS PROGRAMMING
To Next Page
Loading...
