NEC NEAX 2000 IPS - Page 155

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 141 – NWA-008853-001 Rev.3.0
97ch3002.fm
Operating Procedure
To access a Brokerage-Hot Line-CCIS from a D
term
:
1. Lift the handset or press the Speaker key.
2. Press the line/feature key associated with the preassigned station.
The destination station is automatically dialed, ring back tone is heard and the destination station
answers.
3. After completion of conversation, hang up or press the Speaker key.
To make another Brokerage-Hot Line-CCIS call immediately, press another line/feature key without going
on hook and off hook.
DESCRIPTION DATA
•
(1)
(2)
Y=2
000-299: Memory Slot No.
XXX...X: Station Name Character by
MAT/CAT (Maximum 16 char-
acters)
Assign the Hot Line pairs.
Bidirectional Hot Line should be assigned as
follows:
Hot Line
Pair No.
Calling Side Called Side
00 Station A Station B
01 Station B Station A
NOTE 1: Up to 100 Hot Line stations (50
pair) can be set.
•
(1)
(2)
Y=00-99 Hot Line pair No.
0: Calling Station
1: Called Station
Station No.
E00X
X: 0-7: ATTCON No. assigned by CM06
Y=01
CXX (For Called Outside party)
XX: Abbreviated Code given by CM71
NOTE 2: Do not assign station number
with first digit “0”.
Assign the Virtual Line station and RELEASE
keys on the D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
X-XXXXXXXX: Virtual Line station No.
F1020: Release key
A
CM72
CM52
CM90
,
END
BROKERAGE-HOT LINE-CCIS