NEC NEAX 2000 IPS - Page 120

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 106 – NWA-008853-001 Rev.3.0
97ch3001.fm
DESCRIPTION DATA
For area code delection, designate the digits to
be deleted.
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
153: Designation of digit to be deleted
00 : No digit deletion
01-10: Leading 1-10 digits deletion
CCC : No digit deletion
When sharing LCR Pattern number and LCR
Pattern number for alternative routing (To al-
low maximum 255 alternative routing offices),
specify to assign area code addition by CM8A
Y=5000-5255>178.
[Series 3300 software required]
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
177: Sharing LCR Pattern No. for alterna-
tive routing
0 : Assigned by CM8A Y=5000-
5255>178
1 : Assigned by CM8A Y=5000-
5255>100
For area code addition, designate the digits to
be added when CM8A Y=5000-5255>177 2nd
data is 1.
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
100: Designation of Digit Addition Pattern
No.
9000-9255: Digit Addition Pattern No.
000-255
CCC : No digit addition
For area code addition, designate the digits to
be added when CM8A Y=5000-5255>177 2nd
data is 0.
[Series 3300 software required]
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
178: Designation of Digit Addition Pattern
No.
9000-9255: Digit Addition Pattern No.
000-255
CCC : No digit addition
•
(1)
(2)
Y=9000-9255
Digit Addition Pattern No. 000-255
0: Entry of digit code to be added
X-X---X: Digits to be added
(Maximum 32 digits)
Specify the maximum number of dialed digits
sent to the CCIS network.
(1)
(2)
379
0 : 24 digits
1 : 15 digits
A
CM8A
CM08
B
DIGITAL CCIS PROGRAMMING