CHAPTER 3 SYSTEM DATA PROGRAMMING
– 181 – NWA-008853-001 Rev.3.0
97ch3002.fm
NOTE 1: The maximum number of stations that can be provided with user’s name display is 384.
The maximum number of characters per name is eight, including spaces.
NOTE 2: User’s name can be assigned to Single Line Telephones, and cannot be assigned to the Atten-
dant Console.
Continued on next page
DESCRIPTION DATA
Provide each CCH number with Name Display
feature.
•
(1)
(2)
Y=26 Name Display
0-7: CCH No. 0-7
0: To provide
Enter the desired user’s name to each station
number with Character Codes or characters.
•
(1)
(2)
Y=0 By Character Code
X-XXXXXXXX: Station No. assigned by
CM10/CM14/Virtual
station No. assigned by
CM11
20-7F: Character Code
Maximum 32 digits
(See CM77 in the Command Manual)
NONE : No data
•
(1)
(2)
Y=1 By character
X-XXXXXXXX: Station No. assigned by
CM10/CM14/Virtual
station No. assigned by
CM11
A-Z, 0-9 : Character
Maximum 16 characters
NONE : No data
Assign the desired trunk name to each trunk
route by CM77 Y=2 or Y=3.
•
(1)
(2)
Y=2 By character Code
00-14, 16-63: Trunk Name No. assigned by
CM35 Y=03.
Character Code 20-7F:
(See CM77 in the Command Manual)
NONE : No data
•
(1)
(2)
Y=3 By character
00-14, 16-63: Trunk Name No. assigned by
CM35 Y=03.
A-Z, 0-9 : Character Code
Maximum 4 characters
NONE : No data
A
CMA7
CM77
END
JANUARY/31/2006
CALLING NAME DISPLAY-CCIS
To Next Page
Loading...
