CHAPTER 3 SYSTEM DATA PROGRAMMING
– 249 – NWA-008853-001 Rev.3.0
97ch3004.fm
• For Tandem Office (Office B)
Operating Procedure
1. Lift the handset and receive a dial tone.
2. Dial the trunk access code and telephone number (e. g. 911).
3. The system automatically completes a call and sends the pre-assigned number:
calling area code + calling station number.
DESCRIPTION DATA
Provide the system with Caller ID Display fea-
ture for CCIS calls.
(1)
(2)
379
0: To provide
Send ANI signal to the network on
Enhanced 911 calls.
(1)
(2)
474: Enhanced 911
0: To send
Provide each CCH number with Name Dis-
play-CCIS feature.
•
(1)
(2)
Y=26
0-7: CCH No. 0-7
0: To provide
Provide the CCH number with Calling
Party Information transferring service.
•
(1)
(2)
Y=28
0-7: CCH No. 0-7
0: To provide
Provide the Calling Party Information transfer-
ring service to the Enhanced 911 route.
•
(1)
(2)
Y=145
00-63: Trunk Route No.
0: To provide
START
CM08
CMA7
CM35
END
CENTRALIZED E911-CCIS
To Next Page
Loading...
