CHAPTER 3 SYSTEM DATA PROGRAMMING
– 279 – NWA-008853-001 Rev.3.0
97ch3004.fm
Operating Procedure
To place a Hot Line-CCIS call:
1. The user at Station A lifts the handset.
2. Station B is rung.
3. The user at Station B lifts the handset and the connection is established.
DESCRIPTION DATA
Specify the result of Switch Hook Flash on Hot
Line station.
To allow Hot Line stations to transfer a call or
access a feature, set the data to”0”.
(1)
(2)
057
0 : Special Dial Tone
1 : Attendant Recall
A
CM08
END
HOT LINE-CCIS
To Next Page
Loading...
